Customizing Keychron Q6 Ultra
IMG_20260424_133715.jpg
IMG_20260618_231248.jpg
IMG_20260807_120342_5k.jpg
The stock Keychron keycaps with the OSA profile look not bad, but I’m not a lover of typewriters aesthetic.
Since I’m used to hitting combos like CTRL/SUPER/ALT/SHIFT with a single finger for certain shortcuts, I needed to find low-profile keycaps that are all the same height.
Pressing two keys simultaneously may be unfamiliar to casual typists, but if you use a tiling WM, where everything from launching apps to window management - is shortcut-based, it makes total sense.
I immediately picked up some pretty decent low-profile Womier keycaps.
The undersides might have some mold marks, but with a little modding, they are actually quite good.
I also picked up some OUTEMU Half-height switches for testing.
They are low-profile, but that’s all.
The tactile feel is non-existent.
Looking ahead: the stock Keychron Silk POM Tactile Bananas are very good, but they honestly can’t be compared to the Gazzew Boba Black U4T.
IMG_20260508_155203.jpg
IMG_20260508_155303.jpg
IMG_20260508_155311.jpg
IMG_20260508_155400.jpg
IMG_20260513_182232.jpg
IMG_20260513_182307.jpg
IMG_20260513_182310.jpg
IMG_20260513_182321.jpg
IMG_20260513_182352.jpg
IMG_20260513_182423.jpg
IMG_20260513_182434_low.jpg
IMG_20260616_155912.jpg
Keychron Q6 Ultra 8K - ZMK and RTL8762G
The power efficiency of ZMK firmware running on the RTL8762G chip is impressively low. Following a full charge two weeks ago, with daily Bluetooth usage totaling 4-6 hours, KDE still reports 100% battery life, while the keyboard’s internal reading (via Fn+B) shows 90%.
KDE-Bluetooth.png
KDE-Power-Battery.png
And here it is. Of course, the firmware source code hasn’t been uploaded yet, obviously.
IMG_20260616_224747.jpg
IMG_20260616_224808.jpg
IMG_20260616_224843.jpg
Keychron Q6 Ultra PCB v1.2
IMG_20260616_224944.jpg
IMG_20260616_225031.jpg
IMG_20260616_225117.jpg
You can never have too much sound dampening
Adding Extra Noise Dampening to the Switch Pad
IMG_20260617_120337.jpg
IMG_20260617_120354.jpg
IMG_20260617_120427.jpg
IMG_20260617_120509.jpg
IMG_20260617_120516.jpg
IMG_20260617_143543.jpg
Gazzew Boba U4T switches
Lubing and filming switches. GPL205, Poron gaskets, poron noise dampeners, poron switch films.
IMG_20260617_160010.jpg
IMG_20260617_160015.jpg
IMG_20260617_160024.jpg
Battery
Rechargeable Polymer Lithium-ion Battery
3.7V 4000mah
Model: 606090
Assembly
I was a bit surprised, but in the end, everything managed to fit together.
IMG_20260618_094739.jpg
IMG_20260618_094811.jpg
IMG_20260618_094921.jpg
IMG_20260618_094947.jpg
IMG_20260618_095058.jpg
IMG_20260618_100048.jpg
IMG_20260618_100106.jpg
IMG_20260618_100140.jpg
IMG_20260618_100122.jpg
IMG_20260618_105909.jpg
IMG_20260618_105922.jpg
IMG_20260618_105941.jpg
Gazzew Boba U4T
IMG_20260618_095412.jpg
IMG_20260618_095506.jpg
IMG_20260618_095524.jpg
IMG_20260618_095912.jpg
IMG_20260618_095932.jpg
IMG_20260618_100007.jpg
A mid-build update
The keyboard is now fully usable.
IMG_20260807_120427.jpg
IMG_20260807_120035.jpg
IMG_20260807_120931.jpg
IMG_20260807_123421.jpg
IMG_20260807_120434.jpg
IMG_20260807_123339.jpg
True Black
Gazzew Boba U4T have one extra advantage: they are completely black.
You can’t even see them under the keycaps—everything looks perfectly black.
IMG_20260807_120246.jpg
IMG_20260807_120713.jpg
IMG_20260807_120738.jpg
IMG_20260807_121139.jpg
IMG_20260807_123045.jpg
IMG_20260807_123445.jpg
IMG_20260807_122948.jpg
IMG_20260807_122952.jpg
IMG_20260807_123009.jpg